Can I use the floppy disk emulator to connect to my network?

Can I use the floppy disk emulator to connect to my network?

No, because the RJ45 port on the front of the unit is designed for future functionality and is currently inactive. Currently the only method to load the device is via the USB stick. We do, however, provide solutions for interfacing between a CNC control and network storage.

Replace your floppy disk on your CNC machine tool. We have a device called the Floppy Emulator. A lot of times, we still see the floppy discs out on the shop floor. As you well know, these are too hard to find, hard to maintain, and unreliable! So, we’ve come up with a solution to allow you to eliminate that floppy disc by using our Floppy Emulator.

This device basically allows you to use a USB stick that you can plug into your PC, format it to 1.44 MB, plug it into this device, and deliver your NC program to your machine control. The advantage is that you no longer have to deal with that media and essentially is more reliable, but everybody has a USB stick available at their PC. We supply all the documentation and it’s very simple to connect.

On the back of your machine, you typically will have a power cord and an IDE Cable you plug that in the exact same spot, then it’s up and running! Your machine control believes that it is still using a floppy disc, so procedure on the machine is exactly the same. This is why we prefer and recommend the solution to eliminate the floppy disc, it allows you to breathe life into your equipment, and continue to use your machine tools, but deliver a better method of managing your NC programs, rather than a floppy disc.