USB LAN Connect Pendant

Add USB & Ethernet to your CNC

  • Send, receive, and drip feed to your CNC
  • 4-line LCD display with USB port
  • Includes 8GB USB memory stick
  • Drag and drop files over Ethernet to your CNC
  • No special software is required. Use standard FTP software or Windows.
  • Future-proof your shop floor for CNC networking
  • Mid-tape start with search function, end of block character control, & more
  • Connects via RS232 serial on CNC
  • Unlimited folders for part programs
  • Directory listing
  • Eliminate expensive memory upgrades
  • Software, hardware & Xmodem flow control support
  • Includes RS232 cable for your CNC
  • 1 Year Warranty
  • Lifetime support in USA

$650

Please give us a call to purchase.
1(877)611-5825

Features

The USB LAN Connect Pendant is a USB to CNC communication device that can be used to load and save programs from your CNC Memory and drip-feed to most CNC Machines. The USB Connect contains its DNC firmware and requires no other device or components to work. Increase program storage at the machine with this device.  The unit also includes an Ethernet port to connect to the local network if desired.  Use standard FTP software to move files from your network to the device’s internal memory, then load the part program to the CNC.  Not ready for networking, you are not required to use the Ethernet port.  Want to go wireless: Add a wireless bridge of your choosing and now wirelessly transfer to the machine.

The device comes with all the components for the customer to install on your CNC machine. The USB LAN Connect Pendant includes 8GB USB Flash Drive Stick, a panel mount USB connector/waterproof cap, display, USB cable, and a power cable. AC power cord is included. Supports up to 16GB USB flash drives.

This hardware solution becomes part of the CNC control.  The USB LAN Connect will work on virtually any CNC control that supports standard serial protocols.

Support for over 80 different control brands: Siemens, Anilam, Allen Bradley, Bridgeport, Cincinnati, Citizen, Dynapath, Fagor, Fadal, Fanuc, Haas, Yasnac, Brother, Mitsubishi, Amada, Centurion, Charmilles, Giddings & Lewis, Heidenhain, Hurco, Mazak, Milltronics, Mori Seiki, Okuma, Proto Trak, Sodick , Siemens, and others. Please call to confirm if you don’t see your control in this list.

Drip-feed (DNC) large files from the USB Connect device (your CNC must support this).  If you use USB drives on the shop floor now, purchasing this device will standardize the method of transfers to your CNCs.

Eliminate using PCMCIA cards that are difficult to find and generally can be damaged by inserting them into your CNC.  USB drives are standard and simple to remove.

Don’t have time to install this device? Don’t want to dedicate it to one machine? Check out our USB Connect Portable!

Have a Mazak machine? Or need to backup to your existing CNC Network  for when computers fail?

Youtube's logo, which is a rounded rectangle with a white arrow pointing right.

Got Questions?

Send us an email!

Technical Specs

  • 4 line LCD display with 3 button selection
  • Protocols Supported: Xon/Xoff, software handshaking, RTS/CTS hardware handshaking & X-modem
  • Supports drip-feed for the above Protocols (if CNC has function active)
  • Baud Rates: 1200 – 115,200 supported
  • Configurable data/parity/stop bits
  • Configurable line delay & EOB CR/LF
  • Mid-tape restart with search function
  • Add percent sign to programs on the fly
  • Supports Fadal X-modem/Fadal file transfers and Haas X-modem
  • Connects to RS232 serial port on CNC & no special software required
  • Use any brand/size USB memory stick
  • Includes power cord for support between  115-230 volts AC.
  • Easy to read LCD green screen
  • Create unlimited folders to organize part programs

WHAT’S INCLUDED IN THE BOX

  • LCD display
  • Main control board
  • Din rail, mounting screws
  • USB port with cap
  • USB cable
  • 15 Ft RS232 Serial Cable
  • DB25 Male/Female Connector for CNC
  • 8GB USB Memory Stick
  • AC power cord
  • 1-Year Warranty
  • Free USA Phone Support
  • Quick Setup Guide & Complete Operation Manual

Call (877) 611-5825

A close up of a USB Connect Portable screen with a powered on 4-line screen. The text reads "Read our Hardware Case Study".